ESI Phone User Manual page 70

User's Guide
Answering a call using a paired Bluetooth headset
Here is the procedure for answering a phone call when using a Bluetooth headset that is paired to your
ESI phone via the ESI Bluetooth Headset Interface.
Note: When an incoming call rings on the ESI phone, the headset will provide an audible ringing if the
headset supports this. This may cause a delay in the audio to the headset; some headset models
may not pass the audio through to the headset until the audible ringing has been completed.
1. When an incoming call rings the ESI phone, tap the Bluetooth headset's Call button
ESI phone's programmed HEADSET key.
The HEADSET key on the ESI phone will glow green.
Note: If the Bluetooth headset moves out of range, the call will remain connected via the ESI
2. When finished with the call, tap the Bluetooth headset's Call button or press the ESI phone's
HEADSET key.
Placing an outbound call using a paired Bluetooth headset
1. With the ESI phone idle, tap the Bluetooth headset's Call button or press the ESI phone's
programmed HEADSET key.
The ESI phone's HEADSET key will glow green, and you'll hear dial tone on the Bluetooth headset.
2. Dial the desired telephone number.
Notes: Special features such as voice commands, switching between calls, etc., using the Bluetooth
3. When finished with the call, tap the Bluetooth headset's Call button or press the ESI phone's
HEADSET key.
(Continued)
1
The name given to this button may vary by headset manufacturer.
2
See the ESI Cellular Management User's Guide (ESI document # 0450-1189). ESI User's Guides are available from
www.esi-estech.com/users/downloads.
phone's HEADSET jack but audio will be lost. When the Bluetooth headset moves back into
range, the Bluetooth connection will be re-established and audio will return.
headset button(s) won't be supported (unless you're using a Cellular Access key
If the Bluetooth headset moves out of range, the call will remain connected via the ESI
phone's HEADSET jack but audio will be lost. When the Bluetooth headset moves back into
range, the Bluetooth connection will be re-established and audio will return.
F.11
Special keys
1
or press the
2
).