ESI Phone User Manual page 28

User's Guide
If using an ESI 60 Business Phone
Note: If you're using an ESI 60D (digital) phone, there will be a two- to three-second delay in display
performance when you enter or exit the visual voice mail feature described below. (There is no such
delay in display performance in using visual voice mail on an ESI 60IP phone.)
1. Press VOICE MAIL.
The first time you press VOICE MAIL (or whenever you press the scroll keys to move to a different
page of voice mail messages or recordings), the upper display will show:
2. Enter your password if required (you may change the requirement for a password in user
programming menu 5; see "Password," page C.5).
3. You'll see that the phone's lower display has updated to
display your eight most recent voice mail messages, with
each new message highlighted.
Use the scroll keys below the lower display to see the
next eight messages (press the left scroll key to scroll
down and the right scroll key to scroll up).
4. You'll also notice that each message is associated with
two programmable feature keys — one on the left side
and one on the right side.
For each message, pressing either programmable feature
key updates the upper display's first two lines with the
message's full Caller ID information.
What else happens will depend on which of the two
programmable feature keys you press:
• Pressing the right-side programmable feature key causes
the message's time stamp to appear on the upper display's
third line.
• Pressing the left-side programmable feature key causes the
message to begin playing.
5. To select the next voice mail message, press the appropriate programmable feature key.
D.5
Voice mail operation