Table of Contents
Advertisement
User's Guide
Auto-dialing using Esi-Dex
. . . On an ESI phone with a two-line display
1. While your station is idle (or just after receiving internal dial tone), repeatedly press ESI-DEX to
select the desired Dex:
Notes: System Dex isn't available on every system.
2. Choose the desired name from the selected Dex, using one of two methods.
Either:
(a.) Scroll — Press the scroll keys (
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.) Dial-by-name — Dial up to the first three characters
mailbox name. For example: if you want to call John Doe, dial 5 6 4 (because it spells J O H).
You'll begin to see names that begin with those letters. You can then use the scroll keys (
and
3. Press ESI-DEX again to dial the number.
. . . On an ESI phone with a three-line display
1. While your station is idle (or just after receiving dial tone), press ESI-DEX. This causes the Esi-Dex
menu to appear, as shown:
2. Press a key to choose the appropriate Dex —Station Dex (STA), System Dex (SYS), or Personal
Dex (PER) — or press RELEASE to cancel the procedure.
Notes: System Dex isn't available on every system.
The display now reads:
(Continued)
1
You can also dial just one or two characters, and then press # to enter.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
) until you find the desired name and number.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
and
) to look up and down through the Dex until you find
1
of the extension, department, or guest
F.3
Special keys
Hide quick links:
Advertisement
Table of Contents
