ESI Phone User Manual page 67

User's Guide
Using Esi-Dex: An example
Let's say you're on a call with the XYZ Company — XYZ COMPANY appears on your display — and you
wish to save the name and number for future use. Just press ESI-DEX. Your display will confirm that the
information has been stored.
for each model of ESI phone.
. . . On an ESI phone with a two-line display
1. Press ESI-DEX until you see PERSONAL DEX on the display.
2. Enter 9 2 5 (W A L). The display will show the first stored name that starts with the character range
from WAJ to YCL.
3. Press the scroll keys (
4. Press ESI-DEX again. This dials the number for the XYZ Company.
Important: The number dialed (if stored from a Caller ID) will be the number for the actual line used by
. . . On an ESI phone with a three-line display
1. While your station is idle (or just after receiving dial tone), press ESI-DEX.
2. Press PER to select the Personal Dex.
(Continued)
1
If the number is already in your Personal Dex, the message ALREADY STORED will appear on the display. This indicates
Esi-Dex has prevented storing the same number multiple times.
1
Then, to call the XYZ Company in the future, use Esi-Dex as described below
and ) until XYZ COMPANY appears in the display.
the caller, and may be different than the caller's listed number. Additionally, some local calls
may not be auto-dialed correctly, depending on the limitations of your area's local dialing
plan. You may wish to create a manual listing for these. Consult your Administrator if you
need more help.
F.8
Special keys