Introduction Toocépower Logic Controller Remote; Controller - Oce TC4 User Manual

Introduction toOcéPower Logic
Introduction toOcéPower Logic
Use the Océ Power Logic
application
In order to access the Océ TC4 Power Logic ® controller application from a remote
workstation (e.g. when you have bought a system without a monitor, mouse and keyboard)
you must use Océ Power Logic ® controller Remote to connect to the controller.
You can use Océ Power Logic ® controller Remote to access the following workspaces
from a remote workstation.
'Scan jobs'
Use this workspace to manage your scan jobs and scan destinations.
Scanner 'Templates'
Use this workspace to manage the scanner templates.
'Preferences'
Use this workspace to change the default settings of the system.
'Configuration'
Use this workspace to set all the connectivity and security settings.
Note:
Certain functions cannot be used when you logon remotely to the Océ TC4 Power
Logic ® controller application e.g. scan-to-file viewing with Océ View station LT).
User modes
The Océ TC4 Power Logic ® controller application has different user modes.
on page 18. An additional user mode is the Océ Service mode. This mode is for the Océ
service technician only. You can check in which user mode you are logged on because
the user name is displayed in the left hand side of the status bar at the bottom of the
screen.
66
Chapter 3 - Océ Power Logic
®
controller Remote
®
controller Remote to access the Océ TC4 Power Logic
®
controller Remote
®
controller Remote
®
'The users'