Do an extended scan-to-file job
Define the job settings.
3.
[16] The top 5 settings of a scan job template
'Available settings for scan-to-file jobs' on page 36
Scroll to a setting.
Select a setting with the left softkey.
Scroll to the required value.
Select the next setting with the left softkey.
Scroll to the required value.
Select 'Close' to close the setting.
Repeat the selection of settings from bullet 3 if you need to define more settings.
Press the green 'Start' key.
4.
Result
The scanner scans the original and sends the scanned file to the defined scan-to-file des-
tination.
34
Chapter 2 - Use the Océ TC4