Log On To Océ Power Logic Controller Remote - Oce TC4 User Manual

Log on to Océ Power Logic
User modes
The Océ TC4 Power Logic ® controller application has the following user modes.
Repro operator
Key operator
System administrator
Océ Service.
Only assigned operators are allowed to use the user modes. Different passwords are required
to access the user modes.
You do not need a password for the anonymous user mode.
Passwords
The default password for the system administrator is SysAdm.
The default password for the repro operator is RepOp.
The default password for the key operator is KeyOp.
It is advised to change the default passwords to prevent unauthorized access. When a user
is logged on, the user can change the password for the current user mode.
Password' on page 77
Note:
The passwords are case sensitive.
Authorization
There can only be one system administrator, key operator or repro operator active at a
time in the application. Only one user at a time that is logged on in a certain user role is
authorized to change the settings. An error message appears when a second user tries to
log on in a certain user role. There is no limitation of users authorized to view the settings.
How to log on to the controller application
1. Select the 'Log on' menu to access the logon dialog box.
2. Select the required user name.
3. Enter the password.
Log on to Océ Power Logic
®
controller Remote
Chapter 3 - Océ Power Logic
®
controller Remote
'Change the
®
controller Remote
75