Oce TC4 User Manual page 58

How to retrieve scanned files via FTP
Retrieve files via an FTP command line prompt
Launch an FTP client.
1.
Enter the 'FTP' command.
2.
A DOS box now appears with the FTP prompt.
Enter the 'Open' command followed by either the registered name of the Océ Power
3.
Logic ® controller or the IP address (for example: 194.2.66.146) to connect to the con-
troller and press Enter: 'open 194.2.66.146'.
The connection with the controller is now established and a window appears asking you
for a user name.
Enter your user name 'Anonymous', and enter as your password also 'Anonymous'.
4.
A connection is now set up for the default user 'Anonymous'.
Set the transmission mode to binary by entering 'Binary'.
5.
Go to the 'Tempstore' directory using the following command: 'cd tempstore'.
6.
Go to the 'Scan' directory if you want to retrieve a file from a destination on the local
7.
host,
or
go to the 'Unsent' directory if you want to retrieve a file from 'Unsent' folder on the local
host.
Get the data file (for example: bugatti.tif) via the 'Get' command.
8.
Quit FTP by entering the 'bye' command.
9.
58 Chapter 2 - Use the Océ TC4