Oce TC4 User Manual page 29

Select the setting with the scroll-wheel key.
4.
There are several types of settings. The behavior of the scanner operator panel and the
definition of a setting depends on the type of setting you selected. You can select one of
the following types of settings.
A setting that contains two values only, like 'On' or ' Off'.
Change the value of the setting with the scroll-wheel key to change the value of the
setting. The value and icon changes.
A setting that contains a list of values, like 'Lighter/darker'.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
A setting that contains a list of settings, like 'Original type'.
Focus on a setting with the scroll wheel. The bold text of a value indicates the focus
of the scroll wheel. The icon changes.
Open the setting with the scroll-wheel key. The list of values appears.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
Note:
You can enter a numeric value with the numeric keys. To enter a negative numeric value,
scroll to a negative value first and than enter the value with the numeric keys.
Select 'Close' with the lower-scroll-wheel key.
5.
Repeat from step 4 to define the next setting.
6.
Note:
Use the 'Defaults' option at the lower-left key to set all settings of the job template to
default.
Use the scanner operator panel
Chapter 2 - Use the Océ TC4 29