Steps in an extended scan-to-file job without fine tuned job templates
Feed the original.
1.
Define the scan-to-file job settings at the scanner operator panel.
2.
Open a template.
Select the first setting and define the value.
Select the second setting and define the value.
....
Select the last setting and define the value.
Press the green start key.
3.
Result
The second step takes several additional actions.
Steps in an extended scan-to-file job with fine tuned job templates
Feed the original.
1.
Define the job settings.
2.
Select the required template at the scanner operator panel and change the pre-defined
settings only if necessary.
Press the green start key.
3.
Result
You get a tuned digital file of your original.
Introduction to scan-to-file jobs
Chapter 2 - Use the Océ TC4
31