Sound And Vibration - Billy Goat OS900SPS Owner's Manual

SOUND
104
Sound tests were conducted in accordance with 2000/14/EC, and were performed on 10-13-2010 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:
VIBRATION DATA
Vibration levels at the operator's handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 10-13-2010 under the conditions listed below.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:
INTENDED USE
INTENDED USE: This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to
assist in overseeding operations. The machine should not be used for any other purpose than that stated above.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble
shooting section on page 14).
Part No 351502
OS900SP Owner's Manual
SOUND LEVEL 84 dB(a) at Operators Position
VIBRATION LEVEL .81g (7.95m/s
6
Sunny
o o
73 F (23 C)
11 mph (17 kmh)
South West
27%
30.34Hg (770 mm Hg
2
)
Sunny
o o
66 F (19 C)
3 mph (4.8kph)
East
30.2%
29.9Hg (101.3kpa
Form No F030311A
)
)