Sound And Vibration - Billy Goat SC180HEU Owner's Manual

SC180HEU Owner's Manual
SOUND
104 dB(a)
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 7-11-13 under the conditions listed
below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for
the sound power level for your model.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:
VIBRATION DATA
Vibration levels at the operator's handles were measured in the vertical, lateral and longitudinal directions using calibrated
vibration test equipment. Tests were performed on 7-11-13 under the conditions listed below.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:
INTENDED USE
INTENDED USE
This machine may only be utilized for the purpose for which it was designed, i.e. to cut 18in (45.7 cm) wide strips of turf. Make
sure that all operators of this equipment are trained in general machine use and safety.
During operation the lawn and turf are cut into strips. Should the cutter's wheels skid during use it is advisable to
WARNING:
adjust the cutting depth. If this operation does not prevent this occurrence check the state of the terrain. If it is too dry it should
be wetted so that the blade encounters a slight resistance, thus making cutting operations easier.
Part No 371515
SOUND LEVEL 84 dB(a) at Operator Position
VIBRATION LEVEL 2.5 g (24.8 m/s
4
Sunny
o o
84 F (28.9 C)
10 mph (16.1 kmh)
East Southeast
37%
30.04 Hg (101.7 kpa)
2
)
Sunny
o o
84 F (28.9 C)
10 mph (16.1 kmh)
East Southeast
37%
30.04 Hg (101.7 kpa)
Form No F102215B