6. Using the Configuration Software
At any point in the configuration software, you can use either a
mouse or keyboard to make selections. If using a keyboard,
press <Alt> followed by the highlighted letter to make a selec-
tion. Pressing the <Tab> key cycles through the buttons dis-
played. Pressing the <Help> key displays information about the
parameters you are setting.
You may use the CFG program to either locally or remotely
manage the RangeLAN2 7500. If you are locally managing the
RangeLAN2 7500, choose Local Access Point after opening
CFG. If remotely managing the RangeLAN2 7500, choose the
correct RangeLAN2 7500 once in CFG. Once the unit has been
selected, you have several configuration options.
Configure RangeLAN2
35