Table of Contents
Advertisement
1. Connect the null modem RS-232 cable
between the RangeLAN2 7500 Local
Management Port and a free serial port on
your PC.
2. If you are running the CFG tool from a
DOS prompt in Windows, load
WINPKT.COM before entering Windows
using the command:
C:\> WINPKT 0X60
3. Copy the software from the RangeLAN2
7500 Configuration Tool diskette to a
directory on your PC's hard disk.
C:\AP> COPY A:*.*
4. One of the files you copied is a batch file
called SLIP.BAT. This file may be edited
with a text editor like MS-DOS's Edit. If
you will be using a serial port on your PC
other than COM2 (I/O 2F8, INT 3) to
configure the RangeLAN2 7500, change the
SLIP.BAT file to reflect the I/O Port
Address and Interrupt settings of your COM
port.
The batch file is formatted as follows:
SLIP8250 0x60 SLIP <INT> <I/O> 9600
(or B:)
24
Advertisement
Table of Contents
