Remotely (In-Band) - Proxim RangeLAN2 7500 User Manual

Remotely (In-band)

The second configuration option is remotely across the wired
network.
7. Choose Local Access Point and press
<Select>. Proceed through the
configuration boxes. For more information
on using the CFG program, see chapter 6.
For more information on the RangeLAN2
software parameters, see chapter 4.
1. Install a wired Ethernet card in the PC you
intend to use for configuration of your
RangeLAN2 7500. This machine will be
sending and receiving IP packets to the
RangeLAN2 7500 during the configuration
process.
2. If you are running the CFG tool from a
DOS prompt in Windows, load
WINPKT.COM before entering Windows
using the command:
26