Table of Contents
Advertisement
Configure Filters
The filter configuration allows you to customize the type of
traffic which is forwarded from the Ethernet network to the
RangeLAN2 network. When a box is checked, this indicates that
traffic that meets the corresponding filter characteristic (e.g.,
Protocol Type) will be filtered OUT, and will NOT be forwarded.
The NON-RANGELAN2 ADDRESS FILTER, when checked,
will prevent traffic which is destined to a non-broadcast, non-
multicast, non-RangeLAN2 address from being forwarded from
Ethernet to wireless. DO NOT use this filter when using the
node address overwrite feature on RangeLAN2 stations.
The NOVELL IPX BROADCAST FILTERS prevent IPX
broadcasts of the specified types from being forwarded from
Ethernet to RangeLAN2. Since RIP, SAP, and LSP broadcasts
are of interest to routers and not end stations, these can filters
can typically be turned on.
40
Advertisement
Table of Contents
