Table of Contents
Advertisement
C:\AP> LSL
C:\AP> ETHDRVR
C:\AP> ODIPKT
9. Start the configuration software:
C:\AP> CFG
10. Choose Default from the list of Access
Points if this is an initial configuration and
press <Select>. If an IP address has already
been assigned to the RangeLAN2 7500,
<Add> the unit to the list of Access Points
with its IP address. Proceed through the
configuration boxes. For more information
on using the CFG program, see chapter 6.
For more information on the RangeLAN2
software parameters, see chapter 4.
29
Advertisement
Table of Contents
