Configure Tcp/Ip - Proxim RangeLAN2 7500 User Manual

You also have the option to enable or disable spanning tree
support. If you have no other bridges on the network, or you
have some method other than the IEEE 802.1d Spanning Tree
Protocol to prevent loops on the network, you can choose to
disable this feature.

Configure TCP/IP

The <Configure TCP/IP> button is used to change the IP ad-
dress, Subnet Mask, and Default Gateway of the RangeLAN2
7500.
If you are configuring the RangeLAN2 7500 remotely and
change the IP address, you may also need to change the
CFG.CFG file on the configuring PC. The IP address of the
RangeLAN2 7500 and that of the configuring PC must be part
of the same IP network.
38