Using An Snmp Management Package - Proxim RangeLAN2 7500 User Manual

Note:
You may not run IP protocol stacks while the CFG
program is loaded.
You may run non-IP protocol stacks while the con-
figuration software program is loaded. In order to do
this, you will need to create entries for those stacks in
the NET.CFG file and bind to the proper frame type.

Using an SNMP Management Package

You may choose to manage the RangeLAN2 7500 by any SNMP
management package. The RangeLAN2 7500 supports the
following managed objects:
MIB-II (RFC 1213)
IEEE 802.1d Bridge MIB (RFC 1493)
Proxim Enterprise MIB
The Proxim Enterprise MIB is supplied in ASN.1 format
on the RangeLAN2 7500 diskette. The filename is
PROXIM.MIB. Follow the instructions in your SNMP
management package for incorporating enterprise-
specific MIBs.
Note:
In order to use SNMP management, you will first need
to supply the RangeLAN2 7500 with an IP address.
30