Table of Contents
Advertisement
C:\> WINPKT 0X61
3. Copy the software from the RangeLAN2
7500 Configuration Tool diskette to a
directory on your PC's hard disk.
C:\AP> COPY A:*.*
4. Edit the CFG.CFG file. This file assigns an
IP address to the machine being used to
configure the RangeLAN2 7500. If this is
the first time you are configuring the
RangeLAN2 7500, leave the default setting
in CFG.CFG. Once the RangeLAN2 7500
has been assigned an IP address, re-edit the
CFG.CFG file so that the configuration PC
and RangeLAN2 7500 have unique IP
addresses but are on the same IP network.
It also specifies the community that will be
used. It is editable with a text editor like
MS-DOS's Edit. A sample CFG.CFG file
looks like:
# Configuration Tool configuration file
ip_address
subnet_mask
default_gateway
access_community
192.0.5.1
255.255.255.0
0.0.0.0
private
27
(or B:)
Advertisement
Table of Contents
