Front-Panel Display Shortcuts - Agilent Technologies 34410A Service Manual

2 Quick Start
Front
Direct front–panel shortcuts are provided for three commonly used display
functions: ranging, digit masking, and integration time.
Ranging.
navigation keypad.
Digit Masking.
(change the number of digits displayed) the reading on the main display,
easing readability.
Integration Time (Bandwidth, Gate Time).
allow you to select the multimeter's integration time: dc voltage, dc
current, resistance, and temperature. The ac voltage and current
measurements allow you to select the ac signal filter (bandwidth). The
frequency/period function allows you to select gate time. The navigation
keypad provides a shortcut for quickly changing these settings.
• If the multimeter is configured to take the measurement using an
• If either the ac voltage or ac current measurement function is selected,
• If the frequency/period measurement function is selected, pressing
40
Panel Display Shortcuts
-
The multimeter's manual range can be set directly from the
To manually change the current multimeter range, press
annunciator will light, and the selected range (e.g. 100mV RANGE)
ManRng
will be briefly displayed on the second line.
The navigation keypad provides a shortcut to mask
To enable digit masking during any measurement function, press
or . DIGIT MASK will be displayed, along with a list of
choices (3.5, 4.5, 5.5, 6.5 and AUTO) on the second display line. Press
or to scroll through and select one of these settings, and then
press .
integration time in NPLCs, pressing
measurement operations will increase or decrease the integration time
setting.
pressing or during front panel measurement operations will
increase or decrease the bandwidth setting.
or during front panel measurement operations will increase or
decrease the gate time setting.
Four measurement functions
or during front panel
34410A/11A/L4411A Service Guide
or . The