Table of Contents
Advertisement
Features
To answer an incoming call using speakerphone
1. Press the
the flashing LED with the
handset on-hook.
2. Speak at a normal voice level toward the telephone.
3. Press
Speed Dial
Speed Dial enables you to call a telephone number with a two- or three-digit access code. There are
two types of Speed Dial numbers:
Station—assigned by individual station users to their own station and can only be dialled from
the station that assigns it.
System—assigned only from attendant consoles or a designated station (typically the System
Administrator station), and can be used by other stations. (See System Administrator User Guide
for storing instructions.)
Important!
To store/replace a telephone number on a Station Speed Dial button
1. Press
handset on-hook
2. Press
telephone number on
...or
number in. See
3. Enter the telephone number (max. 20 digits).
To store longer dialling strings, see
Strata CT Electronic Telephone User Guide November 2001
Line
Line
Line
Line
or [DN] with
SPKR
SPKR
SPKR
SPKR
to disconnect the call.
If you do not perform the following procedures within a specified time (set in system
programming for either one or three minutes) when storing speed dial numbers, the
operation times out and your telephone returns to idle mode.
RDL
RDL
RDL
RDL
# # # #
(or
) with the
SD
SD
SD
SD
to store the
SDS
SDS
SDS
SDS
*
(or
) and enter the Speed Dial code that you want to store the telephone
Table 13
on Page
The Line or [DN] LED flashes (in-use) and you are
connected to the call.
SD
SD
SD
SD
buttons are assigned in system programming.
102
for codes.
Table 14
on Page 102.
Speed Dial
59
Advertisement
Table of Contents
