Automatic Callback (Acb) - Toshiba StrataCT User Manual

Features

Automatic Callback (ACB)

After reaching a busy/DND station, you can set ACB to have the system call you when the called
station becomes available. You can also set ACB to place you in a queue for an available Exchange
Line, if you reach a line group in which all lines are busy.
ACB ACB
ACB ACB
1. Press
4 4 4 4
...or .
2. Hang up
SPKR SPKR SPKR SPKR
...or press
3. Press [DN] to answer the
call within three rings.
Strata CT Electronic Telephone User Guide November 2001
You hear a busy tone, followed by dial tone
for two seconds, then busy tone.
When you set ACB at a busy line group, its
access code number (
You can make other calls while waiting for the called
station/line to become available.
.
Your telephone rings at a fast rate when the
called station or Exchange Line is idle.
The busy or DND station LED flashes
(incoming call) and its number (
displays when it is available.
The Exchange Line LED from which you attempted to first access the
line flashes red (incoming call rate). The seized line number (
displayed.
After you answer, you hear a single tone, and the LED flashes.
If you hear a busy tone after answering a callback, the called party is
already on another call or the line has been seized. Your request is not
cancelled. You are called again the next time the line is idle.
If the original call was made using LCR, the telephone number is
automatically dialled. If you did not use LCR, you have to redial the
telephone number.
) displays.
801
)
210
Automatic Callback (ACB)
NO. 204
INT 210 ACB SET
NO. 204
INT 801 ACB SET
NO. 204
210 ACB
NO. 204
LINE 3 ACB
) is
3
23