Call Transfer With Camp-On - Toshiba StrataCT User Manual

Electronic telephone includes lcd and direct station selection console
Hide thumbs Also See for StrataCT:
Table of Contents

Advertisement

Features

Call Transfer with Camp-on

You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group [DNs], etc. You
cannot transfer (or camp-on) to a station [PDN] or [PhDN] if the station is in the DND mode, unless
the station [PDN] or [PhDN] appears on other stations.
1. Press
2. Dial the [DN] where the
call is be transferred.
3. Announce the call and hang
up if the station is idle
...or if the station is busy or
does not answer, hang up
...or to reconnect to the
transferred line before it is
answered, press the
flashing
#42
#42
#42
#42
Strata CT Electronic Telephone User Guide November 2001
CONF/TRNS
CONF/TRNS
CONF/TRNS
CONF/TRNS
.
Line
Line
Line
Line
or [DN] +
.
The Line or [DN] LED flashes (conference rate). You hear
internal dial tone.
The Exchange Line rings the called station. If you hear a
single tone, you can then announce the call over the called
telephone's speaker. (If you hear ringing tone, the call was
made with Tone Signalling.)
The Line LED flashes (on-hold). If you transferred the call
from a [DN], the [DN]'s LED turns off. The Exchange Line
or [DN] camps onto the called station and the called station
receives a warning tone. The camped-on call rings when
you hang up.
The Line LED is a steady red
when the called station
answers the transferred call.
If the call is not answered after a
specified Recall time set in system
programming, Camp-on is
cancelled. The transferred call returns to your station if your
station or [DN] is idle, sends a two-tone burst if your
telephone is busy.
The LCD shows the Exchange Line number and the station
number (
) where it was originally transferred.
203
Call Transfer with Camp-on
NO. 204
CAMP-ON 4
HOLD LINE 2
LN 2 RECALL 203
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ct

Table of Contents