Answering An (Exchange Line); Speed Dial - Toshiba StrataCT User Manual

Features
To transfer call with camp-on to a busy station
1. Press [DSS]
corresponding to the
busy station.
2. Hang up.

Answering an (Exchange Line)

If your DSS Console is equipped with a
console as you would from a electronic telephone. See
detailed information.
Press the flashing

Speed Dial

Your DSS Console may be equipped with
numbers or to access features.
telephones. See
96
When the called station answers the call, the [DSS] LED stays
steady red, and the Line LED becomes steady red.
If the station does not answer before a period set in system
programming, the call recalls your station.
You may hear a busy tone. The original caller is placed
automatically on hold. The Line or [DN] LED flashes at double
the on-hold rate, and the [DSS] LED remains steady red.
The call rings the called station once with the camp-on tone.
While the called station is receiving this tone, the Line LED on
your telephone flashes (on-hold rate) or if you are on a [DN]
button, it goes idle. The [DSS] LED remains steady red.
When the called station answers the transferred call, the Line
LED becomes steady red. The [DSS] LED remains steady red.
Note
If the call is not answered after a specified recall time set in
system programming, camp-on is cancelled and the transferred
call rings back.
Line Line
Line Line
.
SD SD
SD SD
buttons on the console function like
Chapter 2 – Features, beginning on
If the busy station is in the DND mode, the call is not
transferred, but recalls your telephone immediately.
Line Line Line Line
button, you can answer Exchange Line calls from the
Chapter 2 –
SD SD SD SD
buttons that can be programmed to dial telephone
Page 59 for detailed information.
Strata CT Electronic Telephone User Guide November 2001
DSS Console
Features, beginning on
SD SD
SD SD
buttons on electronic
Page 17 for