Table of Contents
Advertisement
DSS Console
Features
The LED color indications described here apply to DSS Console models HDSS2060 and HDSS1060.
Flash conditions described here apply to all DSS Console models.
Calling a Station
To call a station [PDN] from a DSS Console, press the [DSS] associated with the station. A station
call with a [DSS] button can be made on-hook or off-hook and with Voice First or Tone signalling.
After pressing the button, treat the call like any other station call made from a electronic telephone.
[DSS] LEDs show if the associated station is idle or busy. The LED is steady red if the station is busy
or ringing, and is not lit if idle. If all the station's PDN buttons are being used by other stations, the
[DSS] LED of the station lights steady red, but the station may be idle. If the station is in the DND
mode, its [DSS] LED lights steady red.
Transferring a Call
You can transfer internal or outside calls to an idle station from a DSS Console. You can transfer a call
to a busy station from your DSS Console. Use [DSS] to transfer the call, even though the [DSS] LED
for the station you are transferring to is red.
To transfer a call to an idle station
1. Press the [DSS] button
associated with the
called station.
2. Announce the call.
3. Hang up.
Strata CT Electronic Telephone User Guide November 2001
The call is automatically placed on hold. The Line or [DN]
LED flashes at double the on-hold rate, and the [DSS] LED
flashes.
You hear a single-ring tone. If using the tone signalling mode,
you hear successive ring tones.
With tone signalling, you have to wait for the called station to
answer before announcing the call.
The call rings the called station when you hang up. While the
called station is ringing, the [DSS] LED is steady red, and the
Line LED flashes at the on-hold rate or if on a [DN] button, it
goes idle.
Features
95
Advertisement
Table of Contents
