Speed Dial-Advanced Features - Toshiba StrataCT User Manual

Speed Dial
To insert a pause or flash signal in the number, see
4. Press
To clear a telephone number on a Station SD button
Repeat the previous procedure, skipping Step 3.
To program one-touch telephone number dialling
Repeat the previous procedure, except for Step 3. For Step 3, press [PDN] +
Exchange Line access code before the telephone number. See
Access Codes" on Page
To make a call using a SD button or access code
1. Access an Exchange Line.
If your
to automatically access an
Exchange line, skip this step.
2. Press
SDS SDS
SDS SDS
...or
(See
Speed Dial–Advanced Features
You can program Speed Dial buttons with feature access codes for a single feature or a sequence of
features as long as the keyed dial pad characters do not exceed 20 digits. To determine how many
digits you have, count 2 digits for
other dial pad characters.
60
RDL RDL RDL RDL # # # #
(or )
100.
SD SD
SD SD
button programmed
SD SD SD SD
*
(or ) + access code.
Table 13 on Page 102.)
CONF/TRNS CONF/TRNS
CONF/TRNS CONF/TRNS
"Speed Dial Pause" on Page
The number is stored.
The system dials the telephone number assigned to the
button/code.
HOLD HOLD
HOLD HOLD
, [PDN] and
Strata CT Electronic Telephone User Guide November 2001
63.
"Exchange Line
feature buttons and 1 digit for all
Features