LCD Operation
Message Notification
With an LCD telephone, you can set short messages (up to 32 characters) that display to callers with
LCD telephones. Any station can record a message; however, only stations with an LCD are able to
see the stored messages.
Notification Station Messaging
Your station number and a message indication can be sent to another LCD station. When that station
responds, it receives the message.
1. Press [PDN] and dial
the station DN.
MODE
MODE
MODE
MODE
2. Press
3. Enter the message
number.
MSG W
MSG W
MSG W
MSG W
4. Press
SPKR
SPKR
SPKR
SPKR
5. Press
up to release.
Strata CT Electronic Telephone User Guide November 2001
Station does not answer or is busy.
4 4 4 4
+
.
Station message (10~19), system message (60~99).
The LCD displays the message. This assumes the
message has already been stored in memory.
.
MSG W LED flashes on the
called station and the LCD
displays:
= the called [DN]
204
= the [PDN] of the
207
station that sent the message
= message has been sent.
M
Your LCD displays:
= the called [DN]
204
= message has been
SENT
sent.
or hang
MW TO STXXX
MSG NO.?
CALL 204-207M
Called Station
SENT 204
Your LCD
Messages
85