Alarm Reset
Alarm Reset
Your Strata CT system can be connected to a facility alarm system. All telephones produce a startling
tone whenever this alarm is activated.
To reset the alarm
ALRM
ALRM
ALRM
ALRM
Press
Alert Signalling
Alert Signalling enables you to send an alert sound to a designated station or partner by pressing a
single button. This feature is based on the "buzz" key, where, for example, a manager might alert an
administrative assistant to enter the office.
You can have as many as four Alert Signals to send or receive to/from other telephones. An Alert
Signal is sent even if the alerted telephone is busy (on/off-hook) or in the DND or Call Forward mode.
To send an Alert Signal
ALERT
ALERT
ALERT
ALERT
Press
Attendant Console Calling
Up to four Attendant Consoles can be installed per system. There can be up to three ways to call the
Attendant Console depending upon system programming.
1. Press a [DN] +
2. Dial
20
.
and an alert tone sounds at the designated station.
0 0 0 0
.
The call rings the Attendant Console
0 0 0 0
.
The calls rotate between the consoles, if more than
one console is installed.
0 0 0 0
Strata CT Electronic Telephone User Guide November 2001
Features
button.