Table of Contents
Advertisement
Messages
Messages
The LCD on your telephone can be used to send or receive messages to/from
other LCD telephone users (sample shown at right). It can also display the
names/numbers of the person calling your telephone or the name of the
person you are calling. Names and memos can also be set to display with speed dial numbers and
timed reminders.
You can write or edit a station message (10~19), "fill in the blanks" of system messages 62~64, enter
a name/title that you want to display when other stations call your station (see
Display" on Page
Reminder memo (see
System messages 65~99, if available, are written by the System Administrator and cannot be edited
by the user
To enter LCD characters
1. Access message/memo/name
display.
2. Enter the message/name/memo (up
to 32 alphanumeric characters),
using the following dial pad keys
(dial pad shown at right):
1 1 1 1
– moves right
*
– moves left
# –
# –
# –
# –
toggles between alphanumeric
mode (dial pad defaults to numeric
mode)
0 0 0 0
– scrolls the alpha/special
characters.
3. To blank out any portion of a
message, press
and move the cursor to the right.
80
91), or enter a Speed Dial (see
"Timed Reminders" on Page
1 1 1 1
(in alpha mode)
"Speed Dial Memos" on Page
66).
A cursor (—) appears at the first character in the display.
See
Table 9
on Page
81
Move Right
(Alpha mode only)
Move Left
Each character the cursor transverses is deleted.
Strata CT Electronic Telephone User Guide November 2001
BACK AT 2-PM-CALL
MEETING FOR 3PM
"Name/Number
89) or Timed
for dial pad key equivalents.
Toggles between
alphanumeric
characters
Scrolls alpha/
special characters
LCD Operation
2358
Advertisement
Table of Contents
