Table of Contents
Advertisement
ADSL Router User Manual
After click Next, you will see the web page
listed as the right. Choose the protocol that
you want. And click Next again.
The WAN IP settings will differ slightly
according to the protocol that you choose.
This graphic is the one that you will get if
you choose to add a new interface of PPPoA
mode. You can check Enable NAT for your
necessity.
If you want to add a new interface of IPoA
mode and choose IPoA from the previous
web page, you will get a web page as the
graphic listed in right side.
Be aware that you can Enable NAT in this
page. In addition, you can Add Default
Route in this page, too.
Please refer to Quick Setup for more
information if you don't know how to set the
configuration.
If you want to add a new interface of
Bridging mode and choose Bridging from
the previous web page, you will get a web
page as the graphic listed in right side.
38
Advertisement
Table of Contents
