ADSL Router User Manual
OAM F4/F5 End-to-End/Segment Loopback Cells
Bridging Features
Supports self-learning bridge specified in IEEE 802.1D Transparent Bridging
Supports up to 4096 learning MAC addresses
Transparent Bridging among 10/100 Mb Ethernet and USB
Routing Features
NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users on the
LAN to access the internet for the cost of only one IP address.
ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger, FTP, Quick Time,
mIRC, Real Player, CuSeeMe, VPN pass-through with multiple sessions, etc.
Port Mapping: the users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on
user's local network.
Support DMZ
UPnP IGD (Internet Gateway Device) with NAT traversal capability
Static routes, RFC1058 RIPv1, and RFC1723 RIPv2
DNS Relay, Dynamic DNS
DHCP Client/Relay/Server
Time protocol can be used to get current time from network time server.
Security Features
PAP (RFC1334), CHAP (RFC1994), and MS-CHAP for PPP session
Firewall support IP packets filtering based on IP address/Port number/Protocol type
Bridge packet filtering
URL filtering
Support DoS (Deny of Services) which detect & protect a number of attacks (such as
SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan, etc)
Configuration and Management
User-friendly embedded web configuration interface with password protection
Remote management access control
Telnet session for local or remote management
Firmware upgrades through HTTP or TFTP
The boot loader contains very simple web page to allow the users to update the run-time
firmware image.
Configuration file backup and restore
SNMPv1/v2 agent with MIB-II, ADSL Line MIB
Unpacking
Check the contents of the package against the pack contents checklist below. If any of the items is
missing, then contact the dealer from whom the equipment was purchased.
ADSL Router
Power Adapter and Cord
viii