Table of Contents
Advertisement
Chapter 4: Web Configuration
After adding a new virtual server, click
Apply.
The following screen will be shown to
display the status for new ones.
If you do not want the new server that you
added, please check the Delete box of that
one and click the Delete button to discard it.
Or if you want to add another one again,
click Add to add a new one.
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the
Internet IP Address (the IP Address allocated to you by your ISP.) For example,
Http://203.70.212.52
Ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic.
However, you can use the Dynamic DNS feature to allow users to connect to your Virtual Server
through a URL, rather than an IP Address.
Virtual Servers-Port Triggering
When the router detects outbound traffic on
a specific port, it will set up the port
forwarding rules temporarily on the port
ranges that you specify to allow inbound
traffic. It is supposed to increase the support
for Internet gaming, video conferencing, and
Internet telephony due to the applications
require multiple connection.
To add a new port triggering, click Add to
open this web page. Than choose an
application name from the Pre-defined list
box. The system provides 9 items for your
choice. Or define by yourself by typing the
words into the field of User defined.
Click Apply to complete the setting.
45
Advertisement
Table of Contents
