Admin Account; Remote Access - NetComm RTA1320 User Manual

Adsl router

Table of Contents

Chapter 4: Web Configuration

Admin Account

This page allows you to type in the password for accessing into your DSL Router.

For the Admin Account, the default setting

for user password is admin. If you want to

change the username and the password,

please retype the new password in the

Confirm field for confirmation. Then click

Apply.

There are four interfaces for the remote access. Please choose one of them if you want to enable the

remote access control.

Select the Internet Connect:

Select one connection item from the drop

down list to enable the function.

Web Browser:

Choose this box if you want to have remote

control through HTTP. The default port

number will be shown in the box. Modify

this number whenever you want.

Telnet:

Choose this box if you want to have remote

control through telnet.

TFTP:

Choose this box if you want to have remote

control through TFTP.

Ping:

Choose this box if you want to have remote

control through ping command under DOS

prompt.

To view the host IP address list, click

Authorized Host IP Address List to open

the dialog. In this dialog, please add, delete

the host IP if it is necessary.

Table of Contents