Important Safety Instructions - ALLEN & HEATH XONE V6 User Manual

Read instructions:
Covers:
Mains power:
Installation:
Ventilation:
Moisture:
Environment:
Handling:
XONE:V6 User Guide
Important Safety Instructions – Read First
Read and retain these instructions for future reference. Read the instructions on the Safety Sheet
provided separately. Adhere to all warnings printed here and on the console and its power unit.
Do not remove the power unit cover. Operate the console with its cover correctly fitted. Disconnect
mains power by unplugging the power cord if you need to remove the console cover to set option
jumpers. Refer servicing work to competent technical personnel only.
Connect the console power unit to a mains power supply only of the type described in this user guide
and marked on the unit. The power source must provide a good ground connection. Do not remove
or tamper with the ground connection in the power cord. Use the power cord with sealed mains plug
appropriate for your local mains supply as provided with the console. Route the power cord so that it
is not likely to be walked on, stretched or pinched by items placed upon or against it.
Install the console and its power unit in accordance with the instructions printed in this user guide.
Do not connect the output of power amplifiers directly to the console. Use audio connectors and
plugs only for their intended purpose.
Ensure adequate ventilation around the console and its power unit. Do not obstruct the ventilation
slots or position the unit where the air flow required for ventilation is impeded.
To reduce the risk of fire or electric shock do not expose the equipment to rain or moisture or use it in
damp or wet conditions. Do not place containers of liquids on it which might spill into any openings.
Locate the units away from direct sunlight and any equipment which produces heat such as power
supplies, amplifiers and heaters. Protect from excessive dirt, dust, heat and vibration when operating
and storing. Avoid tobacco ash, drinks spillage, and smoke, especially that associated with smoke
machines. Do not mount the power supply on any surface subject to resonance or vibration.
To prevent damage to the controls and cosmetics avoid placing heavy objects on the console
surfaces, scratching the surface with sharp objects, or rough handling and vibration. Protect the
controls from damage during transit. Use adequate packing if you need to ship the unit.
3