ALLEN & HEATH XONE V6 User Manual page 31

+10, +6, 0dB GAIN
JP5
JP6
JP9
JP10
XONE:V6 User Guide
Input Channel Option Jumpers
RIAA / LINE
JP3
JP1
JP2
JP8
JP7
JP4
INPUT PCB
Plug on jumpers set the options required. Plug across the two pins to
set. Plug on to just one pin to remove.
available to be re-used later in the future if needed.
RIAA disable
CH1-4. For RIAA gain and equalisation JP2, JP3,
JP4 and JP8 are fitted. This is the factory default setting. To disable
RIAA and use these inputs with line sources, remove those jumpers
and fit JP1 and JP7 instead.
Gain setting
CH1-6. The maximum preamp gain avaiable is set
using these jumpers. For +10dB gain all four jumpers JP5, JP6, JP9
and JP10 are fitted. This is the factory default setting. To change this
to +6dB gain fit JP5 and JP9 only. For 0dB gain remove all four
jumpers.
RIAA
JP3 JP3
JP1 JP1
JP2 JP2
JP8 JP8
JP7 JP7
JP4 JP4
This keeps the jumper
LINE
GAIN
JP5
JP6
+10dB
JP9
JP10
JP5
JP6
+6dB
JP9
JP10
JP5
JP6
0dB
JP9
JP10
31