Important Safety Instructions - ALLEN & HEATH GL2800 User Manual

WARNINGS
ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR
WARNING: This equipment must be earthed.
GL2800 User Guide

Important Safety Instructions

-
Read the following before proceeding :
CAUTION
Read instructions:
instructions for future reference. Adhere to all warnings printed here and
on the console. Follow the operating instructions printed in this User
Guide.
Do not remove cover:
their covers correctly fitted. Disconnect mains power by unplugging the
power cord if the cover needs to be removed for setting internal options.
Refer this work to competent technical personnel only.
Power sources:
Connect the console to a mains power outlet only
of the type described in this User Guide and marked on the rear panel.
Use the power cord with sealed mains plug appropriate for your local
mains supply as provided with the console. If the provided plug does not
fit into your outlet consult your service agent for assistance.
Power cord routing:
to be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarisation
means of the power cord plug. Do not remove or tamper with the ground
connection in the power cord.
Water and moisture:
do not expose the console or its power units to rain or moisture or use in
damp or wet conditions. Do not place containers of liquids on surfaces
where liquid may spill into any openings.
Ventilation:
Do not obstruct the power supply heatsinks and
ventilation slots or position the console where the air flow required for
ventilation is impeded. If the console is to be operated in a flight case,
plinth or other furniture ensure that it is constructed to allow adequate
ventilation.
Heat and vibration:
subject to excessive heat or direct sunlight as this could be a fire hazard.
Locate the console away from any equipment which produces heat or
causes excessive vibration.
Servicing:
Switch off the equipment and unplug the power
cord immediately if it is exposed to moisture, spilled liquid, objects fallen
into the openings, the power cord or plug become damaged, during
lightning storms, or if smoke, odour or noise is noticed. Refer servicing to
qualified technical personnel only.
Installation:
Install
instructions printed in this User Guide. Do not connect the output of
power amplifiers directly to the console. Use audio connectors and plugs
only for their intended purpose.
Read and retain these safety and operating
Operate the console and power units with
Route the power cord so that it is not likely
To reduce the risk of fire or electric shock
Do not locate the console in a place
the console in accordance with the
3