Important Safety Instructions - ALLEN & HEATH GL4800 User Manual

WARNINGS
ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR
WARNING: This equipment must be earthed.
GL4800
User Guide

Important Safety Instructions

-
Read the following before proceeding :
CAUTION
Read instructions:
instructions for future reference. Adhere to all warnings printed here and
on the console. Follow the operating instructions printed in this User
Guide.
Do not remove cover:
cover correctly fitted. Disconnect mains power by unplugging the power
cord if the cover needs to be removed for setting internal options. Refer
this work to competent technical personnel only.
Power sources:
Connect the console to a mains power outlet only of
the type described in this User Guide and marked on the rear panel. Use
the power cord with sealed mains plug appropriate for your local mains
supply as provided with the console. If the provided plug does not fit into
your outlet consult your service agent for assistance.
Power cord routing:
to be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarisation means
of the power cord plug. Do not remove or tamper with the ground
connection in the power cord.
Water and moisture:
do not expose the console to rain or moisture or use it in damp or wet
conditions. Do not place containers of liquids on it which might spill into
any openings.
Ventilation:
Do not obstruct the rear and top ventilation slots or
position the console where the air flow required for ventilation is impeded.
If the console is to be operated in a flight case, plinth or other furniture
ensure that it is constructed to allow adequate ventilation.
Heat and vibration:
subject to excessive heat or direct sunlight as this could be a fire hazard.
Locate the console away from any equipment which produces heat or
causes excessive vibration.
Servicing:
Switch off the equipment and unplug the power cord
immediately if it is exposed to moisture, spilled liquid, objects fallen into
the openings, the power cord or plug become damaged, during lightning
storms, or if smoke, odour or noise is noticed. Refer servicing to qualified
technical personnel only.
Installation:
Install
instructions printed in this User Guide. Do not connect the output of power
amplifiers directly to the console. Use audio connectors and plugs only for
their intended purpose.
Read and retain these safety and operating
Operate the console with its underside
Route the power cord so that it is not likely
To reduce the risk of fire or electric shock
Do not locate the console in a place
the console in accordance with the
3