Headphones Output - ALLEN & HEATH XONE V6 User Manual

Headphones Output

TRS jack Tip = L, Ring = R
30 to 600 ohms headphones, 70 ohms recommended
Power 480mW into 70 ohms, 150mW into 600 ohms
Channel Hi-Pass Filter
12dB per octave
Variable frequency 30Hz to 600Hz
On/off toggle switch
Microphone EQ
Vocal optimised LF and HF shelves
HF +/-15dB 2.5kHz shelf
LF +/-15dB 120Hz shelf
Booth EQ
Music optimised LF and HF shelves
HF +/-6dB 10kHz
LF +/-6dB 100Hz
Master EQ
Music optimised LF and HF shelves
HF +/-6dB 10kHz
LF +/-6dB 80Hz
Cue EQ
LF/HF cut/lift tone control
+ = HF lift / LF cut
- = LF lift / HF cut
XONE:V6 User Guide
Frequency response
Line in to Master out +0/-0.5dB 10Hz to 30kHz
+0/-1dB 8Hz to 40kHz
Maximum Output Level
Master output +28dBu into >10k ohm
+22dBu into >2k ohm
TRS output +20dBu into >2k ohm
Booth output +27dBu into >2k ohm
Record output +14dBu into >5k ohm
Headroom
Channels +26dB
Mix +24dB
Distortion THD+N
Master output <0.01% @ 0dBu
<0.03% @ +10dBu
Valve CH5, 6 <0.1% @ 0dBu (2
<0.4% @ +10dBu (")
Crosstalk
Measured 100Hz to 10kHz
Rotary fader shutoff <-90dB
Inter-channel <-90dB
LR separation <-64dB
Headphones to mix <-90dB
nd
harmonic)
37