ALLEN & HEATH XONE V6 User Manual page 19

DC POWER
INPUT
ONLY USE CORRECT
ALLEN&HEATH PSU
DC POWER OUT
XONE:V6 User Guide
Power Supply Connector
DC POWER CABLE
POWER UNIT
POWER RAIL MONITORS
+30V -30V +6.3V PROTECT
DC power input
A heavy duty multi-pin socket for connection to the
external power unit using the DC cable provided. This carries the audio and
logic regulated DC power rails required for console operation.
orientation lug and press the plug in. Rotate the locking ring to secure the
cable in place.
power unit specified for the console.
attempt to modify the cable or power unit in any
way. Failure to observe this may result in damage
to the console.
The power unit has the following status LED indicators
on its front panel:
+30V
voltage rails are available.
+6.3V
available.
PROTECT
safe mode.
power up sequence, and if excessive current is drawn
or a voltage fault detected.
Only connect to the correct Allen & Heath
-30V
and Light when the audio circuit DC
Lights when the logic DC voltage rail is
Lights when the power unit is held in
This protects the console during the
Align the
Do not
19