Location, Mounting and Ventilation
Ventilation
The power supply may be used in rack mounted or benchtop applications. In either
case, sufficient space must be allowed for cooling air to reach the ventilation inputs
Requirements
on the right hand side of the unit and for the fan exhaust air to exit from the rear of
the unit.
Rack
The power supply is designed to fit in a standard 19 in. equipment rack. Use the rack
mount brackets at either end of the front panel to install the power supply in a rack.
Mounting
Use adjustable support angles such as Hammond RASA22WH2, or a support bar
such as Hammond RASB19WH2. Do not use with rack mount slides.
Release 2.2
Installation
Location, Mounting and Ventilation
27