Cable Orientation; Supported Approved Cables; Disposal; Figure 15: Cable Orientation For Insertion - Mellanox Technologies SwitchX MSX1016X-2BFR Hardware User Manual

Rev 1.2
mechanism particular to the cable vendor. When a logical connection is made the green light will
come on. When data is being transferred the light will blink green.
Cables in the middle row should be inserted up side down in relation to the how the
cables are inserted in the top row.
To remove, disengage the locks and slowly pull the connector away from the port receptacle. The
LED indicator will turn off when the cable is unseated.
Care should be taken not to impede the air exhaust flow through the ventilation holes next to the
data connection ports. Cable lengths should be used which allow for routing horizontally around
to the side of the chassis before bending upward or downward in the rack.
When inserting cables into the switch always insert the center row cable before the top and bot-
tom row cables.
4.1.5

Cable Orientation

The cables need to be inserted according to Figure 15.
4.1.6

Supported Approved Cables

For a list of all approved cables see:
www.mellanox.com/related-docs/user_manuals/Mellanox_approved_cables.pdf
4.2

Disposal

According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
For proper disassembly instructions see the Mellanox website.
28 Mellanox Technologies

Figure 15: Cable Orientation for Insertion

Installation