Chapter 3 Hardware Basic Operation And Installation; Switch Platform Hardware Overview; Led Assignments; Figure 4: Switch System Front Panel - Mellanox Technologies SwitchX MSX1016X-2BFR Hardware User Manual

SwitchX® 64 Port SFP+ Ethernet Switch Hardware User Manual
3 Hardware Basic Operation and Installation
3.1

Switch Platform Hardware Overview

Figure 4 shows the front view of the switch. The figure shows port configurations for the switch
systems, interface connectors, and various status LEDs.
UID
RST
All connectivity is via the connector side panel. All connectors can support active cables.
3.1.1

LED Assignments

3.1.1.1 System Status Indicators
The System Status Indicators are located on the left side of the front (connector side) panel. The
system status indicators should display as follows:
When the switch is plugged in, within four minutes the following LEDs should be evident.
• The Status LED
• The Fan LED
• The Bad Port LED
• The Unit ID LED should be off.

Figure 4: Switch System Front Panel

should light up green.
should light up green.
should be off.

Figure 5: Status LEDs

UID
RST
Mellanox Technologies 15
Rev 1.2
SX1016
Mellanox