Mellanox Technologies SwitchX MSX1016X-2BFR Hardware User Manual page 24

Rev 1.2
Connector
side
3. Decide which mounting option you want to use.
To use the rail kit to transfer the power cord from the connector side to the power side
go to Transferring the Power Cord - Section Appendix C:.
4. Screw the switch slides onto the switch. Use 5 flat head screws for short switches and 7
screws for standard depth switches, to connect each switch slide.
24 Mellanox Technologies
Figure 11: Mounting Options
Connector
Rack door
Connector
Connector
side
Vertical
Support
side
side
Power side
Rack door
Power side
Vertical
Support
Installation
Power side
Power side