Scanner; Stylus; Double Tap; Calibration - LXE VX3Plus Reference Manual

104

Scanner

Access:
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
To set the Scanner parameters, please see Chapter 4, "Scanner" for details.

Stylus

Access:
Set double tap sensitivity properties and/or calibrate the touch panel.

Double Tap

Follow the instructions on the screen and tap the OK box to save the changes. The changes take
effect immediately.

Calibration

VX3Plus Reference Guide
Start | Settings | Control Panel | Scanner
Start | Settings | Control Panel | Stylus

Figure 3-30 Stylus Properties / Recalibration Start

Figure 3-31 Stylus Properties / Recalibration

Control Panel Options
E-EQ-VX3PLUSRG-A