Table of Contents
Advertisement
[Time] Page
This page sets the current clock time.
This page can be used during access using
"admin".
Press the [OK] button to enable the new
0
settings.
If the [OK] button is pressed upon entering an
0
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Memo :
Adjust Time and Time Zone together.
0
The time of the internal clock may be
0
significantly out of alignment if the power of the
product is turned off for a long time or when there
is prolonged power failure. If this occurs,
readjust the clock time.
Settings
.
* Setting values with R are default values.
Time
Displays the clock time of camera.
You can correct the time by entering a value
(without seconds).
Memo :
The time is recorded in the JPEG header
0
distributed by the camera. Discontinuity may
occur in the JPEG header's time immediately
before and after changing the time.
Time Zone
Sets a time zone.
[Set values: (GMT-12:00) to R(GMT)UTC to (GMT
+12:45)]
PC Time to Camera
Click [Set] to set the computer's time on the
camera.
[Password] Page
This page sets a password.
This page can be used during access using
"admin".
Note :
Always handle the password carefully so that
0
you do not forget it.
If you have forgotten the password, please
0
consult our customer support center.
Settings
.
admin, operator, user
9 User Name
You must set passwords for the "admin", "operator"
and "user".
Memo :
You cannot specify a user name other than the
0
character strings displayed.
9 Password
Enter a password.
You can use a combination of alphanumeric
characters with hyphen (-), period (.) and
underscore (_). Specify a password between 1 and
16 characters. The camera is case-sensitive.
9 Password Re-Input
Enter the new password again for confirmation.
9 Action
Enables password settings or deletes them. When
you press a button, its confirmation screen
appears.
Set: Sets the password you have entered.
[Advanced Settings] Page -[Time] Page
47
Advertisement
Table of Contents
