Table of Contents
Advertisement
Auto Cleaning
9 Auto Cleaning
You can set whether to automatically clean the
0
power and signal transmission components.
Setting to "ON" executes cleaning at the preset
time specified in [Auto Cleaning Time].
Select "ON" or "OFF", and click [Apply].
0
[Set values: RON, OFF]
Note :
When the camera has stopped at the pan
0
position for more than 7 days, it will pan at the
specified time and perform cleaning
automatically. Cleaning takes about 1 second to
complete.
9 Auto Cleaning Time
You can set the time to start auto cleaning.
To change the setting, enter the time and click the
[Apply] button.
[Set values: 0-23 h, 0-59 m, R00 h 00 m]
[Miscellaneous] Page
This page displays the software information of the
camera.
This page can be used during access using
"admin", "operator" or user.
.
[Operation] Page
This page displays the operation status of the
camera.
This page can be used during access using
"admin" or "operator".
Settings
.
Operation
9 Total Sending Bitrate
Displays the total TCP/UDP bit rate sent by the
camera, and individual bit rates.
9 Destination
Displays the number of streams the camera is
sending.
Log
9 System Log
Displays a log.
[Advanced Settings] Page -[Maintenance] Page
49
Advertisement
Table of Contents
