Precautions - JVC VN-H657U Instructions Manual

Precautions

Updated Information
For the latest firmware version, please visit our
0
website.
(The latest firmware version can be found on the
Download page of V.NETWORKS.)
http://www3.jvckenwood.com/english/pro/
vnetworks/index.html
For more details on firmware update, refer to the
0
Firmware item on the [Maintenance] page.
(A P48 [[Maintenance] Page] )
Storage and Operating Environment
VN-H657U is an indoor camera. It cannot be used
0
outdoors.
VN-H657U is a pendant mount camera. Be sure
0
to place the camera head horizontally. The
product will not work properly if it is tilted.
Use of this product and cables connected to this
0
product at locations where strong electric waves
and magnetic waves are generated (e.g., near
radio, TV, transformer, monitor, etc.) may cause
noise interferences in the images or changes in
the color.
Inadequate heat ventilation may result in
0
malfunction of this product. Be sure not to block
vents around the product. This product
discharges heat from the surface of the main unit.
Do not install it at locations directly subjected to
0
cold air such as near the vents of air-conditioners
or at locations with high temperature.
Condensation may occur inside the dome cover.
Do not store in the following environments.
0
It might result in malfunctions or failure.
Locations beyond the allowable operating
0
humidity range of 20 %RH to 90 %RH.
(Condensation is not allowed)
Near equipment that emits strong magnetic
0
fields, such as transformers or motors.
Near equipment that emits radio waves, such
0
as transceivers and mobile phones.
Locations with excessive dust and sand.
0
Locations that are subject to vibration such as
0
inside the car or ship.
Locations prone to moisture such as window
0
side.
Locations subject to steam or oil, such as
0
kitchens.
Special environment, such as those with
0
combustible atmosphere
Locations that are subjected to radiation, X-
0
rays, salt attack or corrosive gases.
Locations where medicine is used such as
0
pools.
Hot or cold places that are beyond the
0
allowable operating temperature range
Allowable operating : -10 °C to 50 °C
temperature
Transportation
Do not throw away the original box of the unit.
0
Keep it and use it for transporting the unit in
future.
As the camera unit is of an easily rotatable
0
structure, secure the camera unit inside the
dome cover such that it does not rotate before
transporting. Otherwise, an error may occur
during camera operation.
A With the lens facing the horizontal direction,
secure the lens unit with a tape.
B Insert cushioning material wrapped with air
caps (approx. 50 mm ´ 200 mm) at two
opposite sides of the camera.
When attaching the ceiling mount section to the
0
camera unit before transporting, pull out the tip
of the fall prevention wire to prevent it from being
caught between the camera and the ceiling
mount section. Otherwise, it may be difficult to
detach the ceiling mount section from the
camera.
Pull out the tip of the fall
prevention wire
.
Transporting the Unit
Remove the connecting cables when
0
transporting the unit.
When transporting the unit, turn off the power of
0
the system.
Pack the unit with cushioning material so as to
0
avoid shock when transporting.
Handle the unit with care and do not subject it to
0
vibration or shock.
Cushioning
material
Secure with
tape
Precautions
9