Table of Contents
Advertisement
Setting Using Internet Explorer
Setting (continued)
Time Page
This page is for setting time.
This page can be used during access using admin .
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry
will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
SNTP
B
NTP Server
C
Access Interval
D
Time
E
Time Zone
F
PC Time to
Camera
For setting the SNTP client feature.
When this is set to On , the system accesses the specified NTP server at
regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by VN-
V686WPU. Discontinuity in JPEG header's time may occur immediately
before and after acquiring time from the NTP server.
For setting the IP address of the NTP server.
For setting the time interval for access to the NTP server.
Displays the time on the clock of VN-V686WPU.
The clock time can be changed by entering an appropriate value. (Second
value cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by VN-
V686WPU. Discontinuity may occur in the JPEG header's time immediately
before and after changing the time.
For setting the time zone.
Click [Set] to load the time from the computer that is currently in use.
A
B
C
D
E
F
Advertisement
Table of Contents
