Time Page - JVC VN-V686U Instructions Manual

Setting Using Internet Explorer
Setting (continued)

Time Page

This page is for setting time.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
SNTP
B
NTP Server
C
Access Interval
D
Time
E
Time Zone
74
For setting the SNTP client feature.
When this is set to AOnB, the system accesses the specified NTP server at
regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by VN-V686U.
Discontinuity in JPEG header's time may occur immediately before and after
acquiring time from the NTP server.
For setting the IP address of the NTP server.
For setting the time interval for access to the NTP server.
Displays the time on the clock of VN-V686U.
The clock time can be changed by entering an appropriate value. (Second value
cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by VN-V686U.
Discontinuity may occur in the JPEG header's time immediately before and after
changing the time.
For setting the time zone.
A
B
C
D
E